Stores
Filter
  • Store formats
  • Store services
Stores near:

    DIY Vanity Tray

    Level of difficulty:  Beginner

    This elegant tray is easy to create and makes a beautiful addition to a bathroom counter! Use it to hold a pretty soap dispenser or jewelry dish.

    What You'll Need:

    • Crafter’s Closet Wood Plaque
    • Crafter’s Closet Craft Wood Stain Driftwood
    • Crafter’s Closet Washi Tape
    • Crafter’s Closet White Acrylic Paint
    • Crafter’s Closet Premium Paint Brush
    • Crafter’s Closet Palette
    • Crafter’s Closet Hot Glue Gun
    • Crafter’s Closet Hot Glue Sticks

    Let's Do This!

     

    Step 1:

    1. Stain the front of the wood plaque. Let dry. Note: The stain is not water-based, so clean your brush with paint thinner or mineral spirits.

     

    Step 2:

    1. Place a piece of tape down the center of the plaque. This will act as a “spacer” to ensure the lines are even.
    2. Run a strip of tape right up against the center “spacer” tape.
    3. Remove the “spacer” tape from the center and reapply it on the other side of the previous piece of tape.
    4. Run another strip of tape right up against the “spacer” tape. Repeat this process to cover the whole plaque with strips of evenly spaced tape. Discard the original “spacer” tape.

     

    Step 3:

    1. Cover the taped plaque with white paint. Let dry.
    2. Remove the tape strips.

     

    Step 4:

    1. Take apart the bead garland and select four white beads. Hot glue them to the bottom of the plaque to act as feet for the tray.

    Suggested Products

    Related Crafts