Stores
Filter
  • Store formats
  • Store services
Stores near:

    DIY Holiday Door Tags

    Level of difficulty:  Beginner

    These buffalo check holiday door tags greet your guests the minute they walk up to your door. A frosty and festive décor will help you shine all season long.

    What You'll Need:

    • ArtSkills Crafter’s Closet Black Chalkboard Paint
    • ArtSkills Crafter’s Closet Paint Brush Premium
    • ArtSkills Crafter’s Closet Palette
    • ArtSkills Crafter’s Closet Rustic Pallet Sign
    • ArtSkills Crafter’s Closet Acrylic Paint Red/White
    • ArtSkills Crafter’s Closet Black Cord
    • ArtSkills Crafter’s Closet Tacky Glue
    • ArtSkills Crafter’s Closet Wood Letter
    • ArtSkills Crafter’s Closet Iridescent Glitter
    • ArtSkills Crafter’s Closet Silver Glitter
    • ArtSkills Crafter’ Closet Hot Glue Gun
    • ArtSkills Crafter’s Closet Hot Glue Sticks
    • Jingle Bells
    • Ribbon
    • Pliers
    • Scissors 

    Let's Do This!

     

    Step 1: Prepping tags

    1. Remove staples and rope from the rustic pallet signs. Keep one rope for later. Do not take off the plastic hangers.
    2. Paint sides and fronts of both of the rustic pallet signs with black chalkboard paint. Let dry.

     

    Step 2: Painting tags

    1. Place 1 inch painter’s tape in 1 inch increments along the signs horizontally.
    2. Paint red paint over exposed areas. Let dry.
    3. Remove tape. Place 1 inch painters tape in 1 inch increments along the signs vertically.
    4. Paint red over exposed areas. Let dry. Remove tape. 

     

    Step 3: Secure tags together

    1. Pull ends of rope through plastic hangers and knot to hang the two signs together.

     

    Step 4: Glitter the wood letter

    1. Cover wood letter with tacky glue. Cover with glitter. Let dry.
    2. Hot glue the letter to bottom left of the solid black rustic pallet sign. 

     

    Step 5: Frosting the bells

    1. Mix 1 tsp. of white paint and 1 tsp of tacky glue.
    2. Apply paint/glue mixture on jingle bells to “frost” them as shown.
    3. Sprinkle white glitter on wet paint/glue mix. Let dry.
    4. Use black cord to tie bells to plastic tab on top of the plaid rustic pallet sign. 

     

    Step 6: Make Bow

    1. Make the button and first loop of the bow by zig-zagging the ribbon, as shown. The button is a 2" loop and the first loop is a 3 ½" loop. Use your pointer finger and thumb to hold the ribbon.
    2. Make the second, third, and fourth loops by zig-zagging the ribbon back and forth. Keep those loops at 3 ½" as well.
    3. Pinch the ribbon in the center and then twist the 10" piece of wire around the center to hold the bow.
    4. Fluff the loops on the bow and then trim off the excess ribbon from the roll to make the two ribbon tails even. 

     

    Step 7:

    1. Attach bow to rope. Hang.

    Suggested Products

    Related Articles