Castrol GTX High Mileage 5W-20 Synthetic Blend Motor Oil, 1 qt

ITEM
20710401
$3.95 ( Was $4.95 )

Available In Store Only
Print

As vehicles age, they change and some of these changes can result in costly repairs or replacement. Catalytic converter failure is one of the most common – and costliest -- problems faced by higher mileage vehicles. The phosphorus in all motor oil anti-wear packages is also an industry recognized catalyst poison.

Castrol® GTX® High Mileage is specially formulated with less phosphorus than other leading oils, replacing it with advanced technology invented and patented by Castrol that helps prevent catalytic converter and emission system failure and delivers unsurpassed protection against sludge, wear and oil burn-off* 
*vs leading conventional oils, 5W-30 tested

  •  Helps prevent emission system failure and extend the life of your high mileage vehicle
  • Seal conditioners to help reduce leaks and advanced additives to minimize engine wear
  • Improved fuel economy
  • Superior dispersancy that fights sludge build-up and exceptional oil burn-off protection exceeding industry standards**

** based on API and ACEA volatility specifications

More Information
Brand Castrol
Unit Size 1 quart
Available In-Store Only

We want you to be fully satisfied with every item that you purchase from www.dollargeneral.com. If you are not satisfied with an item that you have purchased, you may return the item within 30 days of delivery for a full refund of the purchase price, minus the shipping, handling, and other charges. The item must be returned in good condition, in original boxes (whenever possible), and with all paperwork, parts and accessories to ensure credit.

Related Products
Castrol Transmax DEX/MERC Automatic Transmission Fluid, 1 qt Castrol Transmax™ DEX/MERC Multi-Vehicle Transmission Fluid is for use in transmissions and power steering of older Ford and General Motors vehicles and any other vehicle where the specifications for this product are recommended. PRODUCT BENEFITS Enhanced friction durability for smooth transmission performance Superior high temperature protection for city and highway driving Unsurpassed oxidation resistance to prevent increases in viscosity . Quickview
Castrol Transmax DEX/MERC Automatic Transmission Fluid, 1 qt
Castrol Transmax™ DEX/MERC Multi-Vehicle Transmission Fluid is for use in transmissions and power steering of older Ford and General Motors vehicles and any other vehicle where the specifications for this product are recommended. 

PRODUCT BENEFITS

  • Enhanced friction durability for smooth transmission performance
  • Superior high temperature protection for city and highway driving
  • Unsurpassed oxidation resistance to prevent increases in viscosity
View Details X
Peak Automatic Transmission Fluid, 32 oz Transmissions have many demands placed on them. That’s why PEAK® DEXRON® III/MERCON® Automatic Transmission Fluid is formulated with select, highly refined base oils and specially balanced additives, as well as friction modifiers that provide smooth lockups required by both Ford and General Motors. PEAK® DEXRON® III/MERCON® Automatic Transmission Fluid (ATF) is recommended for use in automatic transmissions in GM, Ford (except where Ford M2C33-F is specified) and other domestic and foreign vehicles requiring DEXRON® III, IIE AND II, as well as MERCON® ATF. Additionally, it can be used in Allison automatic transmissions – including those requiring C-4 fluid – and Caterpillar transmissions specifying T0-2 performance. Always refer to your equipment’s owner’s manual for specific information on Automatic Transmission Fluid requirements. Because it has a high viscosity index, PEAK® DEXRON® III/MERCON® ATF can be used over a wide temperature range – providing excellent low-temperature fluidity while retaining desired viscosity at high temperatures. Specific benefits and product attributes include: Smooth shifting performance where DEXRON® III or a MERCON® fluid is specified High-temperature oxidation resistance Excellent corrosion, wear, and rust protection Compatibility with automatic transmission components, including elastomer seals and plastic parts . Quickview
Peak Automatic Transmission Fluid, 32 oz

Transmissions have many demands placed on them. That’s why PEAK® DEXRON® III/MERCON® Automatic Transmission Fluid is formulated with select, highly refined base oils and specially balanced additives, as well as friction modifiers that provide smooth lockups required by both Ford and General Motors. PEAK® DEXRON® III/MERCON® Automatic Transmission Fluid (ATF) is recommended for use in automatic transmissions in GM, Ford (except where Ford M2C33-F is specified) and other domestic and foreign vehicles requiring DEXRON® III, IIE AND II, as well as MERCON® ATF. Additionally, it can be used in Allison automatic transmissions – including those requiring C-4 fluid – and Caterpillar transmissions specifying T0-2 performance.

Always refer to your equipment’s owner’s manual for specific information on Automatic Transmission Fluid requirements. Because it has a high viscosity index, PEAK® DEXRON® III/MERCON® ATF can be used over a wide temperature range – providing excellent low-temperature fluidity while retaining desired viscosity at high temperatures. Specific benefits and product attributes include:

  • Smooth shifting performance where DEXRON® III or a MERCON® fluid is specified
  • High-temperature oxidation resistance
  • Excellent corrosion, wear, and rust protection
  • Compatibility with automatic transmission components, including elastomer seals and plastic parts
View Details X
Peak Brake Fluid, DOT 3, 32 oz PEAK® DOT 3 Brake Fluid is a heavy-duty glycol-based fluid formulated for use in disc and drum brakes of foreign and domestic cars, truck and motorcycles where a DOT 3 fluid is specified. This fluid contains corrosion and oxidation inhibitors that protect the metallic components of a vehicle’s brake system. It is designed to meet and exceed DOT 3 as well as other Federal and SAE specifications for motor vehicle brake fluids. Specific benefits include:  High temperature stability  Lubricates, protects rubber and metal components  Maintains high boiling point to guard against vapor lock brake failure  Low temperature fluidity  Mixes well with other DOT 3 approved fluids  Resistance to corrosion and oxidation . Quickview
Peak Brake Fluid, DOT 3, 32 oz

PEAK® DOT 3 Brake Fluid is a heavy-duty glycol-based fluid formulated for use in disc and drum brakes of foreign and domestic cars, truck and motorcycles where a DOT 3 fluid is specified. This fluid contains corrosion and oxidation inhibitors that protect the metallic components of a vehicle’s brake system. It is designed to meet and exceed DOT 3 as well as other Federal and SAE specifications for motor vehicle brake fluids.

Specific benefits include:

  •  High temperature stability
  •  Lubricates, protects rubber and metal components
  •  Maintains high boiling point to guard against vapor lock brake failure
  •  Low temperature fluidity
  •  Mixes well with other DOT 3 approved fluids
  •  Resistance to corrosion and oxidation
View Details X